Changes between Version 15 and Version 16 of ControlSystems/Electrical/Training/FallTraining


Ignore:
Timestamp:
Dec 6, 2020, 1:53:52 PM (5 years ago)
Author:
Ryan Nguyen
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • ControlSystems/Electrical/Training/FallTraining

    v15 v16  
    88For this project, you can use either your Arduino kit or TinkerCAD. Note that if you don’t use a high enough resistance for your real life circuit, the LED might stop working permanently.
    99Parts needed: Arduino Uno, wires, LED, breadboard, and a 370-500 ohm resistor.
    10 
     10----
    1111Steps
    1212Once you have all the parts laid out, connect the components together like shown in the picture above, but before you do that, you will need the correct resistance for your resistor.