Changes between Version 6 and Version 7 of ControlSystems/SoftwareTeam/Training/GettingStarted/Cameras

Timestamp:

Nov 15, 2019, 10:59:22 PM (5 years ago)

Author:

David Albert

Comment:

--

ControlSystems/SoftwareTeam/Training/GettingStarted/Cameras

@@ -24 +24 @@
    1. To view the camera feed on the smart dashboard, use the pull-down chooser in the lower left
       corner to select USB Camera 0.
-   1. To display the camera feed using shuffleboard, read about it here:
-      https://wpilib.screenstepslive.com/s/currentCS/m/shuffleboard/l/814689-tour-of-shuffleboard
+   1. To display the camera feed using shuffleboard, read about it [https://wpilib.screenstepslive.com/s/currentCS/m/shuffleboard/l/814689-tour-of-shuffleboard here]
 
 Smartdashboard and shuffleboard can be used interchangeably, however,shuffleboard is far more user friendly and visually appealing.
 
-6. To display the camera open up Shuffleboard and read:
-https://wpilib.screenstepslive.com/s/currentCS/m/shuffleboard/l/831042-displaying-camera-streams
+6. To display the camera open up Shuffleboard and read [https://wpilib.screenstepslive.com/s/currentCS/m/shuffleboard/l/831042-displaying-camera-streams this]
 
 It's often desirable for a robot to have more than one camera; the camera server supports this and you can select cameras using a game controller button or even automatically when the robot changes direction.  You can read about multiple camera selection [https://wpilib.screenstepslive.com/s/currentCS/m/vision/l/708159-using-multiple-cameras here]