== Mechanical Subteam Overview ==


'''Station 1 (Measuring / CAD)'''
1. Participants measure small wooden plank using caliper 
2. Participants measure medium wooden plank using ruler
3. Participants measure large wooden plank using tape measure
4. Participants measure & record wooden cut outs
5. Participants scale up cut outs 

----

'''Station 2 (Stationary Machinery)'''
1. Instructor explain cutting oil
2. Instructor explain purposes of machine 1
3. Instructor demonstrate use of machine 1
4. Participants use machine 1
5. Repeat steps 2-4 with all machines 

----

'''Station 3 (Hand Tools / Fasteners)''' 
1. Instructor explains bolts, screws, nails
2. Instructor explains nuts, lock nuts, washers 
3. Instructs explains use, demonstrates, then allows for participation with each tool below
   Ratchets 
   Wrenches 
   Allen wrenches 
   Hammer / Mallets
   Screwdrivers 
   Pliers
   Nut drivers

----

'''Station 4 (Power Tools)'''
1. Instructs explains use, demonstrates, then allows for participation with each tool below
2. Hand drill 
3. Impact driver 
4. Jigsaw 
5. Saw
6. Circular saw
7. Angle grinder

----

'''Station 5 (Parts / General Closet Organization)''' 
1. Instructor explains the red buttons
2. Participants pull out carts from closet
3. Instructor explains the organizational system
4. Participants find the motors
5. Instructor briefly explain purpose and use of each motor
6. Motors are passed around 
7. Participants put motors back on cart
8. Participants find the wheels
9. Instructor briefly explain purpose and use of each wheel design 
10. Wheels are passed around 
11. Participants put wheels away 
12. Participants are asked to find pieces of polycarb, wood, aluminum
13. Instructor explain when we use each material
14. Participants put everything away

----
''Less than 20 Minutes per station''