Changes between Version 21 and Version 22 of SetupPiZeroSSHOverUSB

Timestamp:

Jun 23, 2018, 8:38:09 AM (7 years ago)

Author:

David Albert

Comment:

--

SetupPiZeroSSHOverUSB

@@ -7 +7 @@
     * Uncomment: framebuffer_height=720 (these set the screen size for VNC when no monitor is attached)
     * Add to end: {{{dtoverlay=dwc2}}}  (is this the default?)
+    * For PiZero platforms add to end: {{{gpu_mem=32}}} (since we need all the RAM we can get on Pi Zero)
     * Edit [http://elinux.org/RPi_cmdline.txt cmdline.txt]:
         * Insert {{{modules-load=dwc2,g_ether g_ether.dev_addr=5a:77:1e:af:8e:9e g_ether.host_addr=72:8d:1f:c4:e8:ca}}} after rootwait. This will load the IP over USB driver and configure a fixed MAC address (otherwise, the Pi will generate a new random MAC address each boot and Windows will think it is a different Pi).  See [http://blog.gbaman.info/?p=791 here] and [https://gist.github.com/Gadgetoid/319ecf8e3c5d3660e298 here] for more info.  Use a unique pair of MAC address for each Pi.  Note there is exactly one space between each term, and the whole cmdline.txt file is one line.